Portable Filter Cart
by Fluidcon
Fluidcon offers both electric and pneumatically powered self-contained portable filter cart with technology that eliminates system blockage and backflow.
No matter what type of equipment is in your fleet, Fluidcon offers a variety of systems that protect fuel and hydraulic oil from contamination. These systems include the Fuel Decontamination Module, the on-board Auxiliary Decontamination Module, and a portable hydraulic fluid filter cart, among others.
We in Engineering provide solution to your problem. Any specific need, please do not hesitate to contact us.
Portable Hydraulic Fluid Filter Cart
We offers both electric and pneumatically powered self-contained portable hydraulic fluid filtration carts. The patented five-stage filtration technology features a built-in non-filter bypass design that eliminates system blockage and backflow. High flow motors hoses mean a short cleaning process time.
The wheeled filter carts use kidney-loop cleaning of used hydraulic oil to promote extended life of both oil and hydraulic equipment. The same cleaning process can be used to ensure new oil’s quality before dispensing, as well as purifying hydraulic systems to rid both the fluid and the hydraulic system of contaminants incidentally introduced during preventive maintenance and repairs.
Features
- Programmable kidney-loop cleaning of hydraulic oils to ISO 4406.
- Cleanliness data monitoring and storage via RS232 connectivity as part of ISO 9001 and product performance/warranty traceability.
- Low noise air motor—less than 80 decibels.
- Non-drip, quick-change couplers for hoses connections.
Large Filter Cart – Kidney Loop
Small Filter Cart – Kidney Loop
Large Filter Cart
Electric Driven
Features
- Large Frame
- Electric Driven
- Staged Filtration Process
- Instrument Display Panel
- PC Interface Software
- Technical Specification
Large Frame
- Solid wheel 10”.
- Tools storage tray available at bottom area.
- Oil container to avoid oil spill to environment
Electric Driven
- Viking gear pump with 2,2 kW motor elektrik has been proven its durability and could generate flow rate up to 60 L/Min.
- Selectable power source using single phase 240V or three phase 380 V.
- Integrated control panel with auto shutdown if failure occurs.
Staged Filtration Process
- Primary filtration by magnetic screen, for separate metal contaminant before entering pump.
- Main filtration is water hydrosorb element and staged filtration from 17-11-5 micron filter, with beta rating β6(c)= 1000.
- Filter cart Incorporated a non filter bypass design to eliminate system backflow.
- Sample point is available for oil condition monitoring.
Instrument Display Panel
- Display panel indicate efficiency condition of filter.
- RED area indicate filters blockage and require replacement immediately.
- Particle Detection display cleanliness details of oil beig processed (Optional).
PC Interface Software
- Filter cart are supplied with RS232 connection PC software for data monitoring and logging ( Electric Model with Particle Detector only).
- Digital particle detection function can be used as measure and monitor mode or set up to control ON/OFF pump system of Filter Cart when oil achieve programmable cleanliness target (Optional).
Technical Specification
| Length | : | 1300 mm |
| Height | : | 900 mm |
| Width | : | 790 mm |
| Weight | : | 200 kg |
| Primary filtration | : | Magnetic screen 100 µm – washable & reusable |
| Secondary filtration | : | Water absorption filter up to 320ml |
| Third filtration | : | - 17 µm Stauff Filter |
| Final filtration | : | - 11 µm Stauff Filter |
| Final filtration | : | - 05 µm Stauff Filter |
| Flow rate | : | 60 Lpm (+/- 10%) (depend on fluid’s viscosity) |
| Suction hose | : | 1 1/2” x 5 m length each |
| Delivery hose | : | 1 1/2“ x 5 m length each |
| Power supply source | : | 220-240 VAC single phase or 380 – 400 VAC three phases. |
| Wheel | : | 10” solid tyres |
| Particle Counter | : | Not Fitted |
Large Filter Cart
Pneumatic Driven
Features
- Large Frame
- Pneumatic Driven
- Staged Filtration Process
- Instrument Display Panel
- Technical Specification
Large Frame
- Solid wheel 10”.
- Tools storage tray available at bottom area.
- Oil container to avoid oil spill to environment
Pneumatic Driven
- Lincoln Diaphragm pump 1 ½” with flow rate up to 130 L/ min and has low level noise(<80dB).
- Air regulator is preset with max pressure at 7 bar.
Staged Filtration Process
- Primary filtration by magnetic screen, for separate metal contaminant before entering pump.
- Main filtration is staged filtration from 17-11-5 micron filter, with beta rating β6(c)= 1000.
- Filter cart Incorporated a non filter bypass design to eliminate system backflow.
- Sample point is available for oil condition monitoring.
Instrument Display Panel
- Display panel indicate efficiency condition of filter.
- RED area indicate filters blockage and require replacement immediately.
Technical Specification
| Length | : | 1300 mm |
| Height | : | 900 mm |
| Width | : | 790 mm |
| Weight | : | 150 kg |
| Primary filtration | : | Magnetic screen 100 µm – washable & reusable |
| Secondary filtration | : | - |
| Third filtration | : | - 17 µm Stauff Filter |
| Final filtration | : | - 11 µm Stauff Filter |
| Final filtration | : | - 05 µm Stauff Filter |
| Flow rate | : | 130 Lpm (+/- 10%) (depend on fluid’s viscosity) |
| Suction hose | : | 1 1/2” x 5 m length each |
| Delivery hose | : | 1 1/2“ x 5 m length each |
| Power supply source | : | Shop air 100 Psi 90 cfm at max flow. |
| Wheel | : | 10” solid tyres |
| Particle Counter | : | Not Fitted |
Small Filter Cart
Electric Driven
Features
- Small Frame
- Electric Driven
- Filtration
- Technical Specification
Small Frame
- Easy movement and compact design.
- Including hose rack and coupler stand.
- Solid wheel 10”.
- Bunded design to avoid oil spill to environment.
Electric Driven
- Internal gear pump series AP02 from Viking pump coupled with motor elektrik generate flow rate up to 30 L/Min.
- Integrated control panel, which has auto pump shutdown when fail occurs.
- Speed adjustment is optional feature to control flow rate generated from the pump.
Filtration
- Primary filtration by magnetic screen 100 mesh, for separate metal contaminant before entering pump.
- Main filtration is staged filtration from 11-5 micron filter, with beta rating β6(c)=1000.
- Filter cart incorporated a non filter bypass design to eliminate system backflow.
- Sample point is available for oil condition monitoring.
Technical Specification
| Length | : | 780 mm |
| Height | : | 1180 mm |
| Width | : | 700 mm |
| Weight | : | Appx. 90 kg |
| Primary filtration | : | Magnetic screen 100 µm – washable & reusable |
| Final filtration | : | 11 µm Stauff Filter |
| Final filtration | : | 05 µm Stauff Filter |
| Flow rate | : | 30 Lpm (+/- 10%) (depend on fluid’s viscosity) |
| Suction hose | : | 1” x 5 m length |
| Delivery hose | : | 1“ x 5 m length |
| Power supply source | : | 220-240 VAC single phase or 380 – 400 VAC three phases. |
| Wheel | : | 10” solid tyres |
Small Filter Cart
Pneumatic Driven
Features
- Small Frame
- Pneumatic Driven
- Filtration
- Technical Specification
Small Frame
- Easy movement and compact design.
- Including hose rack and coupler stand.
- Solid wheel 10”.
- Bunded design to avoid oil spill to environment.
Pneumatic Driven
-
- Lincoln Diaphragm pump 1” generate flow rate
up 60 L/min with low level noise (<80dB). - Air regulator is preset at max 7 bar.
- Lincoln Diaphragm pump 1” generate flow rate
Filtration
- Primary filtration by magnetic screen 100 mesh, for separate metal contaminant before entering pump.
- Main filtration is staged filtration from 11-5 micron filter, with beta rating β6(c)=1000.
- Filter cart incorporated a non filter bypass design to eliminate system backflow.
- Sample point is available for oil condition monitoring.
Technical Specification
| Length | : | 780 mm |
| Height | : | 1180 mm |
| Width | : | 650 mm |
| Weight | : | Appx. 80 kg |
| Primary filtration | : | Magnetic screen 100 µm – washable & reusable |
| Pump | : | Lincoln diaphragm pump |
| Final filtration | : | 11 micron suit HMK05/25FJ |
| Final filtration | : | 05 micron suit HMK05/25FJ |
| Flow rate | : | 60 Lpm (+/- 10%) (depend on fluid’s viscosity) |
| Suction hose | : | 1” x 5 m length |
| Delivery hose | : | 1“ x 5 m length |
| Accessories | : | Air pressure gauge. |
| Wheel | : | 10” solid tyres |
